GLALA

2008 - STARTING OUT

INTRODUCTION

2008 Q4 - Starting Out

2009 Q1 - Beam Shelves

2009 Q2 - Stern

2009 Q3 - Stern, Hog

2009 Q4 - Stern

2010 Q1 - Frames & Ribs

2010 Q2 - Frames & Ribs, Afterdeck

2010 Q3 - Hull, Afterdeck

2010 Q4 - Floors, Cabin Sides


2011 Q1 - Bilges, Engine Room

2011 Q2 - Deck Beams, Ports

2011 Q3 - Deck Beams, Cabin Aft

2011 Q4 - Maindeck

2012 Q1 - Maindeck, Foredeck

2012 Q2 - Foredeck, Electrics

LIFTING

Work began in early 2008 with the boat still in the water but was then delayed over the summer until a space on land became available, she was finally hauled out in October 2008.

cabinfloor

wheelhouseprops and rudder

liftlayed up

 

DEMOLITION

It starts. The ply under the teak deck was rotten so it all had to be lifted. The boat had little by way of proper deck beams, the cabin was a rather flimsy plywood structure that probably dates back to the late 1940s, but was sitting on a very strong hull.

deckdeck

cabincabin

cabincabin

-

Rot in the plywood cabin sides, so we had to keep demolishing. In the end all of the superstructure aft had to be removed. The funnel and hatches were put aside.

rotrot

stripped deckfunnel

cabin sidescabin sides

 

ENGINES

The engines were lifted out to be sent for a rebuild. They had cracked cylinder heads and a corroded cooling system.

enginesengines

enginesengines

engines